The Ankur Metal India stocks a large inventory of fasteners for commercial, industrial, utility, and OEM installations. We have Fasteners such as screws, Coupling Nuts , bolts, nuts, washers, and studs available in several grades and materials. Along with the standard fasteners we also stock B7 bolts & studs and stainless steel, nuts, Coupling Nuts, bolts, and washers. We also carry a large inventory of mechanical anchors such as, drop-ins, wedge anchors, tapcons, lead, plastic, and hollow wall anchors.
Ankur Metal India is a full line fastener distributor that stocks a wide variety of products. No matter what the specification, we can replace what you're looking for. If it's not on our shelves we will outsource the product to ensure our customers' satisfaction. With Ankur Metal India, there is no job to large or small. We cater to any fastener need.
Ankur Metal India is a major player in the fastener industry who handles the needs of any customer. For construction, we sell Coupling Nuts to all the fields with a heavy concentration in electrical, mechanical, and steel erection contractors. We have a very large inventory of Coupling Nuts , specialty bolts in all of our warehouses, supplying fields such as fasteners, anchors, channel and strut accessories.
Ankur Metal India has established itself as the market leader and is recognised for exceptional service, timely delivery, competitiveness, and total solutions.
we also have our sales representatives to understand the requirements of our clients, we maintain ready stock of Coupling Nuts in Cities like Abu Dhabi, Riyadh, Manama, Muscat, Doha, Dubai, Damascus, Khartoum, Beirut, Jeddah, Aleppo, Alexandria, Algiers, Amman, Mosul, Cairo, Baghdad, Dammam, Casablanca, Basra, Mecca, Tripoli, Rabat, Sana'a, Arbil, Hilla, Port Said, Marrakech, Medina, Al Hudaydah, Omdurman, Damietta, Homs, Kafr Dawar, Benghazi, Fez, Bahri, Nouakchott, Sulaymaniyah, Safi, Zarqa, Oran, Kirkuk, Ismailia, Tunis, Agadir, Tangier, Sharjah, Shibin El Kom, Misratah, Matrah, Aden, Najaf, Karbala, Latakia, Sousse, Meknes, Gaza, Fallujah, Aswan, Kassala, Al-Ubayyid, Sohag, Kuala Lumpur, Penang, Kuching & many more...
Coupling nuts are used to make up long tie rod assemblies from shorter lengths of rod and to facilitate assembly of two fasteners or fittings which each have external threads.
Coupling nut dimensions are described by the Industrial Fasteners Institute in standard IFI-128. Chemical and mechanical properties are controlled in conformance with ASTM and SAE nut specifications (ASTM A563, ASTM A194 and SAE J995).
Standard coupling nuts are produced from ASTM A108 grade 12L14 hexagon or round bars with 50 Ksi minimum yield strength. Other available materials include 1045, 4140, structural grades and stainless steels.
Standard finish is plain with either a cold drawn or hot rolled mill finish, depending on the type of bar stock used. Hot dip galvanizing is available as well as zinc electroplating.
Standard threads are UNC 2B, RH, with other thread series and profiles available by special order. Hot dip galvanized coupling nuts are normally tapped oversize after galvanizing to accommodate the zinc coating on the rod threads. Coupling nuts up to 1-1/2" thread size are tapped all the way through from one end, allowing them to be completely threaded on to one of the members which are to be coupled, a feature that is required for certain assembly situations. Coupling nuts larger than 1-1/2" thread size cannot be tapped all the way through without special extended length taps and are therefore furnished with RH/RH threads (tapped to a depth of L/2 from each end) unless specifically ordered as 'threaded all the way through'.
Coupling nuts can also be threaded with two different thread sizes or profiles. These parts are normally identified as 'reducing coupling nuts'.
Refer to the coupling nut table for dimensions. Some of the sizes listed in this table have an 'Across Flats Size' slightly larger than that called for by IF-128 due to commercial availability of hexagon bar stock. Because of limited availability of hex stock larger than 3-1/2", coupling nuts with thread sizes 2-1/2" and larger are usually made from round bar. These larger parts can be provided with milled wrench flats or a milled hex.
Standard coupling nuts meet the chemical and mechanical requirements of ASTM A563 grade A. When high strength rods are specified, coupling nuts produced to meet ASTM A563 grade DH and A194 grade 2H or grade 7 can be provided. These parts will meet all of the chemical and mechanical properties called for in those specifications.
In order to meet the above strength requirements, the rods must be threaded into the coupling nut for a distance equal to or greater than the nominal thread diameter.
The IFI-128 specification describes an optional cross hole located at L/2, (also known as a 'sight hole') which allows visual verification that the threads are fully engaged.
|Finish||Zinc Chromate Plated|
|Thread Style||Fully Threaded|
|Thread Direction||Right Hand|
|Min. Tensile Strength (PSI)||50,000|
|Min. Yield (PSI)||40,000|
|Application||Straight Line Pull Max. 2600 Lbs.|
Rod Coupling Nut, Grd 2, 3/8-16, Pk10
FOB Price: $13.09 to $19.09
Package Qty. 10
DELIVERY: Ex Stock or 15-30 DAYS or AS COMMUNICATION
Pay Mode Terms: L/C (Letter of Credit), T/T (Bank Transfer)
Port of Dispatch : CST Air Port, Mumbai & Nhava Seva Sea Port
Production Capacity : 500 Metric Tons/Month
For quick Quote For Coupling Nuts, please contact our Sales team.
Email : , [email protected]
ORDER ARE PROCESSED IMMEDIATELY & SHIPPED QUICKLY. SPEAK TO A MEMBER OF OUR EXPERIENCED SALES TEAM.