The DM Special Steel Ltd India stocks a large inventory of fasteners for commercial, industrial, utility, and OEM installations. We have Fasteners such as screws, Square Nuts , bolts, nuts, washers, and studs available in several grades and materials. Along with the standard fasteners we also stock B7 bolts & studs and stainless steel, nuts, Square Nuts, bolts, and washers. We also carry a large inventory of mechanical anchors such as, drop-ins, wedge anchors, tapcons, lead, plastic, and hollow wall anchors.
DM Special Steel Ltd India is a full line fastener distributor that stocks a wide variety of products. No matter what the specification, we can find what you're looking for. If it's not on our shelves we will outsource the product to ensure our customers' satisfaction. With DM Special Steel Ltd India, there is no job to large or small. We cater to any fastener need.
DM Special Steel Ltd India is a major player in the fastener industry who handles the needs of any customer. For construction, we sell Square Nuts to all the fields with a heavy concentration in electrical, mechanical, and steel erection contractors. We have a very large inventory of Square Nuts , specialty bolts in all of our warehouses, supplying fields such as fasteners, anchors, channel and strut accessories.
DM Special Steel Ltd India has established itself as the market leader and is recognised for exceptional service, timely delivery, competitiveness, and total solutions.
we also have our sales representatives to understand the requirements of our clients, we maintain ready stock of Square Nuts in Cities like Abu Dhabi, Riyadh, Manama, Muscat, Doha, Dubai, Damascus, Khartoum, Beirut, Jeddah, Aleppo, Alexandria, Algiers, Amman, Mosul, Cairo, Baghdad, Dammam, Casablanca, Basra, Mecca, Tripoli, Rabat, Sana'a, Arbil, Hilla, Port Said, Marrakech, Medina, Al Hudaydah, Omdurman, Damietta, Homs, Kafr Dawar, Benghazi, Fez, Bahri, Nouakchott, Sulaymaniyah, Safi, Zarqa, Oran, Kirkuk, Ismailia, Tunis, Agadir, Tangier, Sharjah, Shibin El Kom, Misratah, Matrah, Aden, Najaf, Karbala, Latakia, Sousse, Meknes, Gaza, Fallujah, Aswan, Kassala, Al-Ubayyid, Sohag, Kuala Lumpur, Penang, Kuching & many more...
A square nut is a four-sided nut. Compared to standard hex nuts, square nuts have a greater surface in contact with the part being fastened, and therefore provide greater resistance to loosening (though also greater resistance to tightening). They are also much less likely to become rounded-off after repeated loosening/tightening cycles. Square nuts are typically mated with square-headed bolts. Square nuts are used along with flat washers in order to avoid damage from its sharp edges and helps to increase the strength of the fastener.
Square nuts are four-sided nuts as opposed to the more common hex (six-sided) nuts. The surface area on the flats is larger than hex nuts, which reduces wrench slippage. However, you cannot use hex drivers such as sockets and nut drivers. Machine screw square nuts are available in smaller sizes and also smaller in width and thickness than regular square nuts. Machine screw square nuts have flat tops and bottoms—the edges and corners are not chamfered (beveled). Regular square nuts have a flat bottom bearing surface and a crowned washer-faced top. Regular square nuts are often used with square bolts.
Threads are standard right-hand and Unified inch coarse series (UNC, Unified National Coarse) or Unified inch fine (UNF, Unified National Fine).
Square Nut Regular Square nut size refers to its nominal thread diameter. Typically, machine screw sizes range from about #2 to 1/2" and regular from 1/4" to 1 1/2". Sizes less than 1/4" appear as a number size (the larger the number the larger the size) while sizes that are 1/4" and larger are specified in inches, usually fractional rather than decimal.
Nut width, which is wrench size, and thickness vary with the size of the square nut. Table 1 lists width across flats and across corners, and thickness for machine square nuts; refer to Table 2 for dimensions of regular square nuts.
Steel, zinc plated, is a common material and finish.
Refer to ASME B18.6.3 for specifications relating to machine screw square nuts and ASME B18.2.2 for regular square nuts.
1/2 BSW x 18.00/20.00AF Bright Square Nuts
1/2 BSW x 18.00/20.00AF Bright Square Nuts Galvanised
M12-1.75 x 18.00/20.00AF Bright Square Nuts
M16-2.0 x 22.00/25.40AF Bright Square Nuts
M20-2.5 x 28.00/30.00AF Bright Square Nuts
M24-3.0 x 36.00/39.00AF Bright Square Nuts
M12-1.75 x 18.00/20.00AF Bright Square Nuts Galvanised
M16-2.0 x 22.00/25.40AF Bright Square Nuts Galvanised
M20-2.5 x 28.00/30.00AF Bright Square Nuts Galvanised
M24-3.0 x 36.00/39.00AF Bright Square Nuts Galvanised
Regular Square Nuts
|Width Across Flats||Width Across Corners||Length|
Machine Screw Square Nut Dimensions
FOB Price: US $1360-1940 / Ton
DELIVERY: Ex Stock or 15-30 DAYS or AS COMMUNICATION
Pay Mode Terms: L/C (Letter of Credit), T/T (Bank Transfer)
Port of Dispatch : CST Air Port, Mumbai & Nhava Seva Sea Port
Production Capacity : 500 Metric Tons/Month
For quick Quote For Square Nuts, please contact our Sales team.
Email : , email@example.com
ORDER ARE PROCESSED IMMEDIATELY & SHIPPED QUICKLY. SPEAK TO A MEMBER OF OUR EXPERIENCED SALES TEAM.