The Ankur Metal India stocks a large inventory of fasteners for commercial, industrial, utility, and OEM installations. We have Fasteners such as screws, Auto Locknuts , bolts, nuts, washers, and studs available in several grades and materials. Along with the standard fasteners we also stock B7 bolts & studs and stainless steel, nuts, Auto Locknuts, bolts, and washers. We also carry a large inventory of mechanical anchors such as, drop-ins, wedge anchors, tapcons, lead, plastic, and hollow wall anchors.
Ankur Metal India is a full line fastener distributor that stocks a wide variety of products. No matter what the specification, we can replace what you're looking for. If it's not on our shelves we will outsource the product to ensure our customers' satisfaction. With Ankur Metal India, there is no job to large or small. We cater to any fastener need.
Ankur Metal India is a major player in the fastener industry who handles the needs of any customer. For construction, we sell Auto Locknuts to all the fields with a heavy concentration in electrical, mechanical, and steel erection contractors. We have a very large inventory of Auto Locknuts , specialty bolts in all of our warehouses, supplying fields such as fasteners, anchors, channel and strut accessories.
Ankur Metal India has established itself as the market leader and is recognised for exceptional service, timely delivery, competitiveness, and total solutions.
we also have our sales representatives to understand the requirements of our clients, we maintain ready stock of Auto Locknuts in Cities like Abu Dhabi, Riyadh, Manama, Muscat, Doha, Dubai, Damascus, Khartoum, Beirut, Jeddah, Aleppo, Alexandria, Algiers, Amman, Mosul, Cairo, Baghdad, Dammam, Casablanca, Basra, Mecca, Tripoli, Rabat, Sana'a, Arbil, Hilla, Port Said, Marrakech, Medina, Al Hudaydah, Omdurman, Damietta, Homs, Kafr Dawar, Benghazi, Fez, Bahri, Nouakchott, Sulaymaniyah, Safi, Zarqa, Oran, Kirkuk, Ismailia, Tunis, Agadir, Tangier, Sharjah, Shibin El Kom, Misratah, Matrah, Aden, Najaf, Karbala, Latakia, Sousse, Meknes, Gaza, Fallujah, Aswan, Kassala, Al-Ubayyid, Sohag, Kuala Lumpur, Penang, Kuching & many more...
Stover lock nuts are one piece, all-metal prevailing torque hex nuts with a conical top and a flat bottom bearing surface with chamfered corners. The locking action, created by distortion of their top threads, is said to be capable of withstanding severe vibration and shock loads. Since they are top locking and only the bottom surface is flat, Stover lock nuts are considered one way lock nuts because they are installed one way—top up. Being all-metal, they do not have the temperature and chemical limitations of non-metallic (such as nylon) insert type lock nuts. Used in the automotive, agricultural equipment and metalworking industries, their cone shape allows for proper orientation during automated assembly making them popular for high volume applications. Stover lock nuts are also called:
automation lock nuts, Autolock nuts, Crownlock nuts, Unitorque nuts.
Lock washers are not used with prevailing torque lock nuts.
By definition, "Prevailing-torque locking fasteners have a self-contained feature which creates frictional interference between the threads of the mating components." Consequently, unlike free spinning lock nuts, there is a resistance to rotation during both assembly and disassembly requiring them to be wrenched; that resistance is called prevailing torque. The advantage is that disassembly is unlikely even if preload diminishes completely because of the remaining rotational resistance. Despite the fact they are called "lock nuts," Stover lock nuts are not permanently locked in place so they can be adjusted or removed after installation. And because they stay put without being seated, they are used as stop nuts or spacers for rotating or other components.
Threads are standard right-hand and Unified inch coarse series (UNC, Unified National Coarse) or Unified inch fine (UNF, Unified National Fine).
Stover lock nut size refers to its nominal thread diameter. Typically, sizes range from about 1/4" to 1". Size is specified in inches, usually fractional rather than decimal.
Grade T9, Cadmium Dichromate Plated, is a common grade and finish. Never replace a graded Stover lock nut with a lower grade or lower strength nut.
Nut width and thickness vary with the size of the Stover lock nut.
The nuts spin freely until their distorted top threads engage the threads of the mating part. For the locking action to be effective, the locking element must contact fully formed threads so several threads of a standard bolt/screw should extend beyond the top of the nut.
Stover lock nuts are reusable a limited number of times because the prevailing torque declines each time the nut is used. Always follow the manufacturer's recommendations regarding nut reuse, thread lubricants and torque values. Do not apply standard torque values to prevailing torque lock nuts because the joint may not be tightened to the correct clamping force due to the additional friction of the locking element.
Generally, prevailing torque lock nuts are not considered suitable for long threaded assemblies because extended nut travel along the threads could damage the nut's locking feature or the mating threads. Therefore, the length of the bolt/screw should not be much longer than that needed to ensure full thread engagement with the nut.
Din 980V Stover Nut is a hex all-metal prevailing torque self-locking nut, which is available in grades 8, 10 and 12 with thread diameters from M4 to M48 in standard pitch, fine pitch and extra replace pitch.
Din 980V Stover Nuts are vibration resistant self-locking nuts. The self-locking function of the Din980V Stover Nut is still effective after a number of applications meaning it can be reused many times and is resistant to shocks, vibration and dynamic loads.
The locking function of the Din 980V Stover Nut is achieved by the deformation of part of the nut. The nut will run smoothly until it reaches the deformed part after which the clamping force will subsequently increase.
|THREAD||S||H||M||STD PITCH||FINE||XTRA FINE|
auto lock nut
FOB Price: US $1000 to 4000 / Ton
DELIVERY: Ex Stock or 15-30 DAYS or AS COMMUNICATION
Pay Mode Terms: L/C (Letter of Credit), T/T (Bank Transfer)
Port of Dispatch : CST Air Port, Mumbai & Nhava Seva Sea Port
Production Capacity : 500 Metric Tons/Month
For quick Quote For Auto Locknuts, please contact our Sales team.
Email : , [email protected]
ORDER ARE PROCESSED IMMEDIATELY & SHIPPED QUICKLY. SPEAK TO A MEMBER OF OUR EXPERIENCED SALES TEAM.